Rodding pokes a hole through a clog. Hydro jetting actually cleans the pipe. High-pressure water strips grease, sludge, mineral scale and small roots off the walls and flushes them out, restoring near-full diameter — which is why a jetted line helps keep the line clear longer than a rodded one. It’s the right call for kitchens that clog again a few months after every cleaning, and the standard preparation before trenchless sewer lining.
Get a fast, written quote
Tell us what’s wrong. We call back fast — we’re open 24/7 — or call (847) 534-9849 now.
Jetting is matched to the pipe: nozzle and pressure are chosen for the line’s size and material, and on older clay or cast-iron lines of unknown condition we camera-inspect first — blasting a collapsed pipe helps no one and we’d rather tell you that before charging you. For Prospect Heights’ restaurants and heavy home kitchens, scheduled jetting turns an annual emergency into a planned, cheaper visit.
What hydro jetting costs in Prospect Heights
Residential hydro jetting typically runs $350–$600 for a main line in the Chicago area — the range published in our cost guide — depending on length, access and how much buildup we’re removing. Commercial and grease-heavy lines are quoted in writing on site before we start.
Your exact price is a written quote, confirmed on site before any work begins — never an hourly meter, never a labour-only headline. See the full Prospect Heights cost guide →
Signs you need hydro jetting
How it works — from your call to fixed
Camera inspection first if the line’s condition is unknown
The correct jetter nozzle is chosen for pipe size and material
The line is jetted from the cleanout, working the full run — not just the blocked spot — flushing grease, scale and root debris clear
A final camera pass or flow test confirms the line is clean
Hydro Jetting vs Drain Snaking: Which One Do You Need?
A drain snake and a hydro jetter solve different problems. A snake is a steel cable that pokes a hole through a clog so water can pass again. It works well for a simple, single clog close to the drain. Hydro jetting uses high pressure water to scrub the full inside wall of the pipe. It removes grease, scale and soft root growth that a snake only pushes through.
Jetting fits clogs that keep coming back, grease lined pipes and main lines with heavy buildup. A camera look first shows which one your line needs. If the pipe is cracked or collapsed, neither one is the fix. The pipe needs repair.
Drain cleaning with a snake typically costs $100 to $475. Hydro jetting typically costs $350 to $600. See our drain cleaning page to compare.
The service standard
Six promises on every call
No all-day waiting windows. We agree a time with you, call ahead, and keep you updated if anything changes — because your day matters too.
2am, Sunday, holiday — the line is open, and you will be talked through shutting the water off first — nobody will try to sell you anything.
You approve the price, in writing, before we lift a wrench. The bill never surprises you afterwards.
If a $90 part fixes it, that’s what we’ll tell you — even when a new unit would pay us more.
Your invoice shows the work done, the parts used and the price, line by line — nothing vague, nothing added afterwards.
Each job is planned carefully before we arrive, so the work is done properly in one clear pass — not with “we’ll have to come back Tuesday.”
Hydro Jetting in 60070 — the local picture
Prospect Heights’ older kitchens are jetting country: decades of cooking grease laid down inside cast-iron and clay lines narrowing a 4-inch pipe to a 2-inch straw. Along Milwaukee Avenue and Elmhurst Road, the corridor restaurants and delis face the same physics at commercial scale. Jetting is the only method that removes the layer instead of drilling through it — which is why a jetted line usually stays clear longer than a rodded one.
Hydro Jetting in Arlington Heights, Mount Prospect and Des Plaines
Hydro Jetting in Arlington Heights
Many Arlington Heights homes date to before the mid 1980s. The Village says these homes often have vitreous clay service lines. Clay joints let tree roots in, and roots slow drains over time. That is when hydro jetting in Arlington Heights makes sense. We run a camera first to see the roots. Then a high pressure water jet clears the pipe wall. The homeowner maintains the whole sanitary service line, up to the Village main. Jetting costs $350 to $600, and you get that price in writing first. See our Arlington Heights plumbing page.
Hydro Jetting in Mount Prospect
Mount Prospect has established neighborhoods with mature trees. Roots find the joints in older clay tile sewer lines. Then drains turn slow, gurgle, or back up. If that sounds like your home, hydro jetting in Mount Prospect can clear the line. A camera look comes first, so you see the roots, cracks, or sagging. Jetting washes roots and buildup off the pipe wall. It costs $350 to $600. You get that price in writing before work starts. Read more on our Mount Prospect service area page.
Hydro Jetting in Des Plaines
A sewer backup in Des Plaines can start in the City main or in your own lateral. The City clears blockages in the main. You own the lateral, including the part under the street. Call City Public Works and Engineering at 847-391-5464 first. If the main is clear, grease or roots in your lateral may be the cause. Hydro jetting in Des Plaines can clear that line. Pair it with a sump pump check for full flood protection. Jetting costs $350 to $600. See our Des Plaines plumbing page.
Hydro Jetting FAQs
How much does hydro jetting cost?
Residential main-line jetting typically runs $350–$600 in the Chicago area, depending on length and access. Commercial and heavy-grease lines are quoted in writing on site — approved by you before we begin.
How fast can you jet my line?
If the line is fully blocked and backing up, call any time and we’ll treat it as the emergency it is. The jetting itself takes about an hour for a typical residential main.
What’s the difference between rodding and hydro jetting?
Rodding cuts through a blockage to restore flow today. Jetting cleans the whole pipe wall, so the next clog takes far longer to form. Rodding is cheaper per visit; jetting is better value for repeat problems.
Can hydro jetting damage older pipes?
On a sound pipe, no — pressure is matched to the material. On a cracked or collapsed pipe it can’t help, which is why we inspect fragile older lines first and tell you honestly if yours is one.
How often should a line be jetted?
Most homes: only when buildup causes repeat clogs. Restaurants and high-grease lines benefit from scheduled jetting every 6–12 months — cheaper than one emergency closure.
Related services
Also serving: Plumbing in Wheeling · Plumbing in Mount Prospect · Plumbing in Arlington Heights · Plumbing in Des Plaines · Plumbing in Palatine
Need hydro jetting today?
Open 24/7 for emergencies. Call now and we will tell you honestly how soon we can reach you. Call (847) 534-9849 any time.