RPZ backflow testing in Prospect Heights - backflow preventer assembly on a building wall

RPZ Backflow Testing in Prospect Heights, IL

RPZ backflow testing in Prospect Heights must happen at least once a year. The City of Prospect Heights code and the Illinois Plumbing Code both require it. A certified inspector, called a CCCDI, must do the test. The owner, occupant or tenant pays. You get your exact price in writing before work starts.

Got a test notice, or not sure your device is due? Call (847) 534-9849. We work from Prospect Heights, IL, and we are open 24/7. Last updated November 8, 2026.

RPZ Backflow Testing in Prospect Heights at a Glance

Here are the key facts in one place. Each row names its source.

QuestionAnswerSource
How often is testing required?At least once a year, and at first installationCity of Prospect Heights code and Illinois Plumbing Code
Who can test an RPZ?A Cross Connection Control Device Inspector, called a CCCDIIllinois Plumbing Code
Who pays for the test?The property owner, occupant or tenantCity of Prospect Heights code
What does testing cost?About $150 to $250 for testing and certificationPublished Chicago area cost guides, not a quote
What if a problem stays unfixed?The city can shut off water after notice, and reconnection costs $500City of Prospect Heights code
Where do I keep the test report?On siteIllinois Plumbing Code

What Is an RPZ Backflow Preventer and What Does It Do?

An RPZ backflow preventer is a safety valve that keeps dirty water out of the clean public water supply. RPZ stands for reduced pressure zone.

Water should only move one way, from the city main into your building. Sometimes pressure drops or changes, and water tries to flow backward. If your system holds chemicals, sprinkler water or other dirty water, it can flow back into the clean supply.

An RPZ stops that with two check valves and a relief valve between them. If a check valve leaks, the relief valve opens and dumps water out of the device. The dirty water goes out the relief port and not into the public supply.

You can often spot an RPZ by its metal body and two shutoff valves. Look for small test ports on the side and a relief port that can drain water. The device only works while it stays in good shape. That is why the rules call for a test every year.

What Do the Key Terms Mean?

A few terms appear in every test notice. Here is what each one means.

TermPlain meaning
RPZReduced pressure zone backflow preventer
BackflowWater flowing backward in a pipe
Cross connectionAny link between clean drinking water and a source that could dirty it
Check valveA one way gate that blocks backward flow
Relief valveA valve that opens and drains water if a check valve leaks
Relief portThe drain opening for the relief valve
Test portA small valve where the tester attaches the test kit
CCCDICross Connection Control Device Inspector, the certified person who tests the device

How Is an RPZ Different From a Double Check Valve?

An RPZ has a relief valve between two check valves, and a double check valve has no relief valve. That extra relief valve makes an RPZ the stronger protection.

FeatureRPZDouble check valve
Check valvesTwoTwo
Relief valveYesNo
Protection levelStrongerLower
Who decides which you needYour water supplierYour water supplier

Do not swap one for the other on your own. Ask the city first, and have a certified tester confirm what you have.

Does Prospect Heights Require RPZ Backflow Testing?

Yes. The City of Prospect Heights code calls for testing and certification at least annually. It also calls for a test at first installation. The Illinois Plumbing Code says a CCCDI must test and approve an RPZ before first use. It also requires a test at least once a year after.

Here is what else the rules say:

  1. The city code says the property owner, occupant or tenant pays for inspection and testing.
  2. The city code says the inspector attaches a tag to each device.
  3. The Illinois Plumbing Code says records that prove testing and maintenance must stay available at the site.
  4. The city code lets the city shut off water service after reasonable notice when a cross connection problem exists. Service returns after you fix the problem and pay a $500 reconnection fee to the city.

You can read the City of Prospect Heights code and the Illinois Plumbing Code section on testing yourself. Rules can change. If you are unsure what your property needs, ask the city Public Works office.

Who Can Test an RPZ Device in Illinois?

Only a CCCDI can test an RPZ device in Illinois. The Illinois Plumbing Code names that person for the job. A general handyman cannot do it, and neither can you.

Before any work, ask the tester to show a current CCCDI certification. If they cannot, do not hire them. A test by anyone else does not meet the rule, and you may have to pay for it twice.

The inspector also tags the device after the test. That tag is part of your proof that the device passed.

Which Properties Usually Need an RPZ Device?

Your water supplier decides which properties need an RPZ device. In Illinois suburbs, these properties often have one:

  1. Lawn irrigation systems
  2. Fire sprinkler systems
  3. Auto fill pools and hot tubs
  4. Restaurants, laundries, car washes and other businesses that use water in a process
  5. Any property that stores hazardous or toxic materials

Not sure if you have one? Look near the spot where the water line enters the building. Check the mechanical room too. Outdoor devices often sit in a box or on a stand near an irrigation line.

If you see a metal assembly with two shutoff valves and a drain port, that is likely an RPZ. A tag with a test date is another clue.

What Happens During an RPZ Backflow Test?

An RPZ backflow test has five steps.

  1. The inspector checks the device, the shutoff valves and the area around it. Clear access helps.
  2. The inspector connects a test kit to the test ports on the side of the device.
  3. The kit measures pressure so the inspector can check each check valve and the relief valve.
  4. The inspector records the results. Each part either passes or fails.
  5. If the device passes, the inspector tags it and gives you a report. If it fails, the device needs repair and a retest.

Water flow through the device stops during the test, so plan around it. Water may also spill from the relief port. Keep the area clear and tell your tenants or staff when the water will be off.

You do not need to prepare much. Make sure the inspector can reach the device. Clear away snow, plants, boxes and storage.

How Much Does RPZ Backflow Testing Cost?

RPZ backflow testing costs about $150 to $250 for testing and certification in published Chicago area cost guides. These are typical ranges, not quotes. Your price depends on your device and your property. You get it in writing before work starts, and nothing begins until you approve it.

A retest costs extra at many companies. A repair costs extra too. Both show up in the written price, so you know the total before you say yes.

How Do You Know If Your RPZ Needs Attention?

An RPZ needs attention when it leaks, fails a test, shows rust or passes its due date. Call when you see any of these signs:

  1. Water drips or runs from the relief port.
  2. The device failed its last test.
  3. You see rust or corrosion on the body.
  4. Water leaks from the body or the shutoff valves.
  5. The housing looks cracked after a freeze.
  6. The tag is missing or the test date is old.

Water running from the relief port is not normal. It can mean a check valve is leaking or dirty. Call before it gets worse.

A device that is past due for its yearly test also needs attention, even if it looks fine.

How Do You Protect an RPZ From Freezing?

Protect an RPZ before cold weather, because a frozen device can crack. A cracked device leaks or fails its test. Illinois winters are hard on outdoor plumbing.

  1. Use an insulated enclosure if the manufacturer and your local rules allow it.
  2. Never block or plug the relief port. Water must be able to drain.
  3. For seasonal irrigation devices, follow the shutdown steps from your irrigation installer or the manufacturer before freezing weather.
  4. After a hard freeze, check the device for cracks and leaks.
  5. Call if you see ice or water at the device.

Our frozen pipe prevention guide covers how to protect the pipes around it. If a freeze has already split a pipe, see our frozen pipe repair service.

What Should You Do When You Get a Test Notice?

When you get a test notice, book a certified test before the due date. Do not ignore it. Follow these steps:

  1. Find your due date. Your device needs a test at least once a year.
  2. Call (847) 534-9849 to book the test.
  3. Clear the area around the device so the inspector can reach it.
  4. Keep the written report on site. The Illinois Plumbing Code says test and maintenance records must stay available at the installation.
  5. Ask the city how it wants test results sent. The code does not spell out the filing steps.

In Prospect Heights, the code gives you written notice and a reasonable time to correct a problem. If you do not fix it, you can owe the city fines and costs. The city can also shut off water service.

What Mistakes Cause Late or Failed Tests?

Five mistakes cause most late or failed RPZ tests.

Owners wait until the last week. That leaves no time to repair a failed device before a deadline.

Storage piles up around the device. An inspector cannot test what they cannot reach.

Shutoff valves seize because nobody has turned them in a long time. A stuck valve can delay the test.

Owners skip winter protection. A cracked device fails the test and needs more than a retest.

Someone without CCCDI certification does the work. The test does not meet the rule, so you pay again.

RPZ Backflow Testing for Prospect Heights Homes and Businesses

We work from Prospect Heights and serve properties on Milwaukee Avenue, Rand Road, Elmhurst Road and Palatine Road, including the Chicago Executive Airport area. You call the same number wherever you are: (847) 534-9849. We are open 24/7.

Homes with irrigation systems and businesses with water based systems both need yearly tests. If you have a device and a due date coming, call before the deadline gets close. Spring is the usual testing season, so book before the busy months.

We also serve Wheeling, Mount Prospect, Arlington Heights, Des Plaines and Palatine. Each town sets its own backflow rules, so check with your own water office.

How Do You Book and Get Your Price?

To book an RPZ backflow test, call (847) 534-9849 at any hour. Then follow these steps:

  1. Tell us what you have. Where is the device, how big is it and when was the last test?
  2. We explain the price for your job.
  3. You get the price in writing.
  4. You approve it, and then the work begins.

Conclusion

RPZ backflow testing in Prospect Heights is a yearly job with clear rules. Illinois and the city both call for a test at least once a year by a certified inspector. The owner, occupant or tenant pays for it.

Book early, keep the device clear and protect it from winter freezes. Keep your written report on site. If the device fails, get the repair price in writing before you agree to work.

Call (847) 534-9849. We are open 24/7.

RPZ Backflow Testing in Prospect Heights: FAQ

How often does an RPZ need testing in Prospect Heights?

An RPZ in Prospect Heights needs testing at least once a year, and when the device is first installed. The city code and the Illinois Plumbing Code both say so.

Who can test an RPZ backflow preventer in Illinois?

A Cross Connection Control Device Inspector, called a CCCDI, must test an RPZ backflow preventer in Illinois. Ask to see their certification before work starts.

How much does RPZ backflow testing cost?

RPZ backflow testing costs about $150 to $250 for testing and certification in published Chicago area cost guides. Your exact price comes in writing before work starts.

What happens if my RPZ fails the test?

A failed RPZ needs repair and a retest. Worn seals or springs are often simple fixes, while corroded parts or a cracked body cost more. The repair price comes in writing before any work begins.

Can I test my own RPZ?

No, you cannot test your own RPZ. The Illinois Plumbing Code says a CCCDI must test and approve the device. A test by anyone else does not meet the rule.

What happens if I ignore the test notice?

If you ignore a test notice, the city code gives you written notice and time to fix the problem. If you still do not fix it, you can owe fines and costs. The city can also shut off water service. Service returns after you correct the problem and pay a $500 reconnection fee.

Will my water be shut off during the test?

Water flow through the RPZ stops during the test, so plan around it. Tell your tenants or staff before the visit.

How do I book an RPZ backflow test?

Call (847) 534-9849 to book an RPZ backflow test. We are open 24/7. You get the price in writing before work starts, and you approve it first.

Sources

  1. City of Prospect Heights code, cross connection control
  2. Illinois Plumbing Code, Title 77, section 890.1130

Cost ranges come from published Chicago area cost guides. They are not quotes.

Business details: Plumbing Prospect Heights, 100 Coldren Dr, Prospect Heights, IL 60070. Phone (847) 534-9849. Open 24/7.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *